Installation of a Modem

Connecting your Modem 

    1 .Connect modem to phone line .2. Connect  your modem to the RS-232 modem port on your camera server.  3. Connect your modem to power and power up your modem. 4. Restart your Axis camera Server.   

      If the modem you are using is one of the “plug and play” modems you should now be able to dial from a Pc to your camera server and connect

       
        Note: the default IP number of your camera server is 192.36.253.80. 

Connecting the modem baud rate

 

        After successfully connecting to your camera server from a PC (as described in configuring the dial-Up Adapter), you can now increase the baud rate of your modem. To do this, follow the instructions below.

                                             
 

              1. From the Home page of your Axis Camera server, click settings.
2. Log on as root (default password is pass).
3. Click the Serial port/Modem button (AXIS 200+/AXIS 240) to go the modem page and modify the baud rate so that it is compatible with your modem. The new port speed will take effect next time you restart your Axis Cameraserver. 

           Note:
The maximum baud rate for the Axis 200+Camera Server is 38400bps and 115200bps for the Axis 240 Camera Server.

          

                      Configuring the Dial-Up Adapter

      

         The following instructions describes how to ser up a Microsoft windows 95B PC for modem dial-up connection to an Axis Camera Server. Deviations from these instruction can be expected when using other operating systems.


It is assumed that the TCP/IP, dial-up networking, modem and serial port configurations are correctly installed. If this is not the case, please consult your Windows 95 documentation and install these before configuring the dial-up adapter for access to your Axis camera Server.